Pressing the Boost button on the Electric Switch raises the target temper-
ature several degrees above the current temperature for the duration of
one hour. If the target temperature is already several degrees higher than
the actual temperature, then pressing boost will simply match this
temperature.
The Boost button
A LightwaveRF Heating Handset can be linked to
an Electric Switch directly, or via a linked Home
Thermostat (see thermostat instructions).
Once linked, the Standby button on the Handset will
toggle between Running and Standby modes in the
same way as the Standby button on the Switch. The
Boost button operates the Switch Boost button.
The plus and minus arrows on the handset will
raise or lower the target temperature a few
degrees above or below the current temperature.
Using the Heating Handset
Manual operation
