![background image](http://html1.mh-extra.com/html/lightwaverf/jsjslw934/jsjslw934_instruction-manual_1915569009.webp)
Pressing the Boost button on the Switch raises the target temperature a
few degrees above the current temperature for the duration of one hour. If
the target temperature is already several degrees higher than the actual
temperature, then pressing boost will simply match this temperature.
Device Setup
The Boost button
A LightwaveRF Heating Handset can be linked to
one or more Electric Radiator Switches to directly
control them (see Handset instructions). It can
also be linked to a Room Thermostat which will, in
turn, control Switches.
Once linked, the Standby button on the Handset will
toggle between Running and Standby Modes in the
same way as the Standby button on the Switch. The
Boost button operates the Switch Boost button.
The plus and minus arrows on the handset will
raise or lower the target temperature a few
degrees above or below the current temperature.
Using the Heating Handset
Summary of Contents for JSJSLW934
Page 2: ......