Installation
Removing the backplate
In order to wire the Electric Radiator
Switch and to mount it to the wall, you
must first remove the backplate. This
can be done by loosening the two
screws situated at the base of the unit
using a suitable screwdriver. Once the
screws are loosened enough so that
they protrude from their screw holes,
gently lift the backplate away from the
main unit and slide it down. Once the
hooks are free from their mountings,
the backplate should slide free.
Mounting the Electric Radiator Switch
The backplate includes two screw holes. These allow the plate to be mount-
ed to a wall using suitable screws. Once mounted, the main unit can be
slotted back into place and the screws tightened. As the Switch has to be
wired to the radiator, ensure that the is long enough to reach from the unit
to the radiator (see www.lightwaverf.com for advice).
Screws
Mounting
hole
Hook
Summary of Contents for JSJSLW934
Page 2: ......
