Overview
The Smart Sensor can detect movement and trigger
your connected Lightwave smart devices via the Link
Plus. 3V CR2477 battery operation capable of 1 year life
and built in ‘battery low’ indicator.
Applications
The Smart Sensor can be used to trigger connected
Lightwave smart devices in the same system.
Automations can be set up for the following
applications: lighting and heating when entering a room,
power outlets on or off when PIR detects movement.
Location
The Smart Sensor can be positioned free-standing on a
table or shelf, or affixed using the magnetic mounting
base on ceiling or wall. Perfect for high traffic rooms in
the house. The Sensor is designed for indoor use only.
Range
Lightwave devices have excellent communication range
within a typical home, however, if you encounter any
range issues, try to ensure that large metal objects or
bodies of water (e.g. radiators) are not positioned in
front of the device or in between the device and the
Lightwave Link Plus.
Help video & further guidance
For additional guidance, and to watch a video that will
help guide you through the installation process, please
visit the support section on
www.lightwaverf.com.
Environmentally friendly disposal
Old electrical appliances must not be disposed of
together with residual waste, but have to be disposed
of separately. The disposal at the communal collecting
point via private persons is for free. The owner of old
appliances is responsible to bring the appliances to these
collecting points or to similar collection points. With this
little personal effort, you contribute to recycle valuable
raw materials and the treatment of toxic substances.
Installation
If you plan to install this product yourself, please follow
the instructions carefully to ensure the product is
installed correctly, if in any doubt please consult our
technical team.
It is important to install this product in accordance
with these instructions. Failure to do so may void your
warranty. LightwaveRF Technology Ltd will not be held
responsible for any loss or damage resulting from not
correctly following the instruction manual.
Preparation
Suitable screwdrivers
You will need
Your Link Plus and smart phone
An appropriate place to situate the Sensor
When fixing the magnetic mount to a wall or
ceiling, ensure you have the correct drill, drill
bit, wall plug and screw.
RF frequency:
868 MHz
Environment temperature:
0-40°C
RF Range:
Up to 50m indoors
Warranty:
2 year standard warranty
Battery required:
CR2477
Battery Life:
Approx. 1 year
EU Declaration of Conformity
Product:
Smart Sensor
Model/Type:
LP70
Manufacturer:
LightwaveRF
Address:
The Assay Office, 1 Moreton Street,
Birmingham, B1 3AX
This declaration is issued under the sole responsibility
of the LightwaveRF. The object of the declaration
described above is in conformity with the relevant union
harmonisation legislation.
Directive 2011/65/EU ROHS,
Directive 2014/53/EU: (The Radio Equipment Directive)
Conformity is shown by compliance with the applicable
requirements of the following documents:
Reference and date:
IEC 62368-1:2018, EN 50663:2017,
EN 62479:2010, ETSI EN 301 489-1 V2.2.3 (2019-11),
ETSI EN 301 489-3 V2.1.1 (2019-03), ETSI EN 300
220-1 V3.1.1 (2017-02), ETSI EN 300 220-2 V3.2.1
(2018-06)
Signed for and on behalf of:
Place of Issue:
Birmingham
Date of Issue:
August 2022
Name:
John Shermer
Position:
CTO
1
UK
Specification
Fresnel Lens
This way
up
Magnetic Mount
Screw to remove back cover
Back
Cover
Spacer
In the box
Lightwave Smart Sensor
Magnetic Mount
CR2477 Coin Cell