manualshive.com logo in svg

Lightwave Communications SCS3230, System Administrator Manual

Share
Download
Lightwave Communications SCS3230 System Administrator Manual Download Page 80

ConsoleServer 3200 System  

 

Lightwave Communications 

Rev. A 

- 80 -  

www.lightwavecom.com 

alphanumeric characters and is case-sensitive) at this prompt and press 

<ENTER>

.  After 

entering the new password, the user will be asked to verify the new password by the prompt 

PLEASE VERIFY PASSWORD

.  The user should enter the new password again at this prompt 

exactly as it was typed the first time and press 

<ENTER>

.  If both new password entries match, 

the SCS3230 will display 

New password accepted.

 on the screen and return to the user 

prompt.  If the new entries do not match, the message 

New and verify password 

mismatch

 is displayed, the new password is rejected, and the old password remains valid.  

The SCS3230 will also reject a new password if the incorrect password is entered when 
prompted for the old password, or if the new password is the same as the old password. 
 

8.6  Logging Out 

 
A user may logout at any time that commands may be made to the SCS3230 by typing 

LOGOUT

, 

LOGOFF

, or by selecting 

LOGOUT

 from a pull-down menu.  When a user is connected to a server 

and they logout, the connection to that server will be broken and any other users that are 
listening to that session will lose their connection to that server as well. 
 

8.7  Checking Connections 

 
CONNECTION INFO SCREEN 

 
+---------------------------------------------------------------------------+ 
¦                              CONNECTION INFO                              ¦ 
+---------------------------------------------------------------------------¦ 
¦01 - TEST                   00 -                        User logged-in     ¦ 
¦02 -                        00 -                        Channel present    ¦ 
¦03 -                        00 -                        Channel present    ¦ 
¦04 -                        00 -                        Channel present    ¦ 
¦05 -                        00 -                        Channel present    ¦ 
¦06 -                        00 -                        Channel present    ¦ 
¦07 -                        00 -                        Channel present    ¦ 
¦08 -                        00 -                        Channel present    ¦ 
¦09 -                        00 -                                           ¦ 
¦10 -                        00 -                                           ¦ 
¦11 -                        00 -                                           ¦ 
¦12 -                        00 -                                           ¦ 
¦13 -                        00 -                                           ¦ 
¦14 -                        00 -                                           ¦ 
¦15 -                        00 -                                           ¦ 
¦16 -                        00 -                                           ¦ 
¦17 -                        00 -                                           ¦ 
+---------------------------------------------------------------------------+ 
 
           Press Any Key To Continue .... 

 

 
Only one user at a time may connect to a device on the SCS3230, except when using listen 
mode (see Section 7.9, Listening to a Server Session for more details). Before attempting to 
select a device port, the user may desire to check if the device port is free.  The 

CONNECTIONS

 

command allows the user to list the users that are logged in, which devices they have currently 
selected, and which mode they are in.  Users may also view this information by selecting 

DISPLAY CONNECTED LIST

 from the pull-down menu when logged in. 

 

Summary of Contents for SCS3230


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands