Lightware UBEX-PRO20-HDMI-F100, User Manual, Page: 54 / 185

5. UBEX Concept series – Extender Application Mode – User's Manual 54 5. UBEX Concept series – Extender Application Mode – User's Manual 54
EXTENDER APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
5.1.3. Transceiver Mode
Port Diagram
The port diagram is valid for the following UBEX endpoint models:
▪
UBEX-PRO20-HDMI-F100
▪
UBEX-PRO20-HDMI-F110
▪
UBEX-PRO20-HDMI-R100 series
Video port diagram of the F100/F110/R100 transceiver
Fiber Optical Interface
The transceiver is able to send and receive HDMI video streams together in the same time over the fiber
optical links.
HDMI Input Modes
The transceiver can receive one HDMI video stream from the HDMI in 2 input port. The signal can be up to
4K@60 Hz 4:4:4. The video stream can be processed in the video processor (it contains
frame rate converter
(FRC)
and
color space converter (CSC)
functions). The video processor settings are available in the LCD menu
(see the details in the L (Local) TRX I2 Port section) and in the LDC software (see the details in the FRC -
Input Side (TX/TRX Modes) section).
ATTENTION! The HDMI in 1 input port cannot accept video signal.
HDMI Output Modes
The transceiver can transmit HDMI video streams on two HDMI 2.0 output ports. The signal can be up to
4K@60 Hz 4:4:4 in the case of both outputs.
The HDMI out 1 transmits the HDMI signal coming from the remote UBEX endpoint. The video stream can
be processed in the video processor (it contains
scaler
,
frame rate converter (FRC)
and
color space converter (CSC)
functions). The video processor settings are available in the LCD menu (see the details in the L (Local) TRX
O1 Port section) and in the LDC software (see the details in the Scaler Panel - Output Side (RX/TRX Modes)
section).
In default state, the HDMI out 2 transmits the HDMI signal coming from the HDMI in 1 input port so it
operates as a local output port. The stream cannot be affected by any video processing.
Source Multiplexer (MUX)
The source multiplexer (
Source MUX
) makes available routing more different source signals to the
HDMI output 2 port.
HDMI out 2
▪ Able to accept signal up to 4K@60 4:4:4 resolution
via the local HDMI in 2
port;
▪ Able to
copy the signal of the HDMI out 1
port up to 4K@60 4:4:4 resolution. This is the
COPY
function.
Summary Tables
HDMI INPUTS
HDMI input 1 HDMI input 2
Accepted signal

up to 4K@60 4:4:4
Scaler - -
Frame rate converter (FRC) -
 
Color space converter (CSC) -
 
HDMI OUTPUTS
HDMI output 1 HDMI output 2
Output signal up to 4K@60 4:4:4 up to 4K@60 4:4:4
Signal source Input port of the remote device
MUX
HDMI in 2
Copy of the HDMI out 1
Scaler
 
-
Frame rate converter (FRC)
 
-
Color space converter (CSC)
 
-

  

  