Lightware UBEX-PRO20-HDMI-F100, User Manual, Page: 75 / 185

6. Lightware Device Controller (LDC) series – Extender Application Mode – User's Manual 75 6. Lightware Device Controller (LDC) series – Extender Application Mode – User's Manual 75
EXTENDER APPLIC
A
TION MODE
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
6.5.3. Scaler Panel - Input Side (TX Mode)
Clicking on the Scaler panel on the HDMI input 1 of the transmitter opens the Scaler properties. This feature
allows to rescale the incoming stream to other resolution and refresh rate and fit to the sink device. #scaler
#csc #colorspace #colorrange
The most important signal and display information and settings are available on the panel.
Scaler panel for the HDMI in 1 (TX)
Available settings and tools:
▪
Scaling mode
– Passthrough: the scaler is in pass-through mode.
– Forced resolution: the scaling is active, the selected value in the forced resolution option will be
applied on the video signal;
▪
Forced resolution
: list of the available resolutions with refresh rate values. The selected one will be
applied on the video signal. See the available resolution in the Resolutions of the Scaler / FRC section.
▪
Image position
(Stretch / Fit / Center)
▪
Color space conversion
(No conversion / RGB / YCbCr 4:4:4 / YCbCr 4:2:2);
▪
Color range
(No conversion / Full range / Limited range);
▪
No Sync Screen (Test Pattern) settings;
▪
Identify Stream / Identify Display button;
▪
Reloading factory default settings
for the selected port.
6.5.4. FRC - Input Side (TX/TRX Modes)
Clicking on the FRC (Frame Rate Converter) panel on the HDMI input 2 of the transmitter/transceiver opens
the properties of the Frame rate converter. #frc #csc #colorspace #colorrange
FRC panel for the HDMI in 2 (TX)
Available settings and tools:
▪
Output resolution mode
– Passthrough: the FRC is in pass-through mode.
– Forced resolution: the FRC is active, the selected value in the forced resolution option will be
applied on the video signal;
▪
Forced resolution
: list of the available resolutions with refresh rate values. The selected one will be
applied on the display device. See the available resolution in the Resolutions of the Scaler / FRC
section.
▪
Color space conversion
(No conversion / RGB / YCbCr 4:4:4 / YCbCr 4:2:2);
▪
Color range
(No conversion / Full range / Limited range);
▪ No Sync Screen (Test Pattern) settings;
▪ Identify Stream / Identify Display button;
▪
Reloading factory default settings
for the selected port.

  

  