Lightware SF000 Manual Download Page 2

Page: 2 / 47

SF000 LiDAR Sensor

Product guide

Overview

The SF000/B is an ultra-small and light laser LiDar sensor designed for size and weight constraint applications.

Using a time-of-ﬂight system to make very fast, accurate distance measurements. Accuracy is not aﬀected by the

colour or texture of the surface, nor the angle of incidence of the laser beam. The SF000/B is virtually immune to

background light, wind and noise, making it an ideal sensor to detect unexpected obstacles.

The SF000/B can take up to 388 readings per second and the conﬁgurable features and multiple hardware

interfaces make the SF000/B easy to connect with diﬀerent types of controllers.

Product support

This document supports the following devices:

Product

Hardware

Firmware

Supported

SF000/B

1.2.0

Yes

Revision

Date

Notes

17/09/2021

Initial release

2 of 47

SF000 microLiDAR™ sensor - Product guide(Rev 5) | © LightWare Optoelectronics (Pty) Ltd, 2021 |

www.lightwarelidar.com

Summary of Contents for SF000
















































Search results

Summary of Contents for SF000

Reviews:

Related manuals for SF000

Brands by name

Popular brands

Lightware SF000, Manual

Search results

Summary of Contents for SF000

Reviews:

Related manuals for SF000

Brands by name

Popular brands