SF000 LiDAR Sensor
Product guide
Installation
Mounting
Make sure the SF000/B is functional before installation. You can use LightWare Studio to verify operation. See the
quick start with LightWare Studio
for details.
The SF000/B requires a clear line-of-sight to measure distance to a target surface. It can be mounted with a vertical
or horizontal lens orientation.
SF000/B mounting orientations
The SF000/B can be mounted in a downward facing orientation for altimetry,
terrain following or precision landing
applications. For terrain following, install the LiDar sensor at an angle to reduce lag time in reaction. The angle
depends on the speed traveled, and the overall system lag, but should be between 20 and 45 degrees. The SF000/B
can be mounted forward facing orientation for sense-and-avoid or position-hold applications.
SF000/B mounting directions
15 of 47
SF000 microLiDAR™ sensor - Product guide(Rev 5) | © LightWare Optoelectronics (Pty) Ltd, 2021 |
