Lightware RAP-B511-EU-K User Manual Download Page 48

Page: 48 / 73

7. LW3 Programmers’ Reference

RAP-B511 series

– User's Manual

7.4.

Time Settings

7.4.1. Query the Timezone

Command and Response

SET·/SYS/MB/TIMEZONE.Timezone=

pw·/SYS/MB/TIMEZONE.Timezone =

Parameters

Time zone setting in POSIX TZ format.

Example

SET /SYS/MB/TIMEZONE.Timezone=CET-1CEST,M3.5.0/2,M10.5.0/3

pw /SYS/MB/TIMEZONE.Timezone=CET-1CEST,M3.5.0/2,M10.5.0/3

TIPS AND TRICKS: Timezone and daylight saving settings can be done easily and quickly with Lightware

Device Controller software in

Time Settings

section.

7.4.2. Enable Network Time Protocol (NTP)

Enabling Network Time Protocol means, that the RAP-B511 is permitted to get time information from an

NTP server. The device time synchronized repeatedly and automatically.

Command and Response

SET·/SYS/MB/NTP.Enable=

<enable_ntp>

pw·/SYS/MB/NTP.Enable=

<enable_ntp>

Parameters

<enable_ntp>

true: NTP

enabled

false: NTP

disabled

Example

SET /SYS/MB/NTP.Enable=true

pw /SYS/MB/NTP.Enable=true

7.4.3.

Enable Getting NTP from DHCP server

When the DHCP server assigns an IP address to the device, there is an option to request an NTP time

information. When the RAP-B511 connected to the internet, the NTP time is updated repeatedly.

Command and Response

SET·/SYS/MB/NTP.NtpServerFromDhcp=

<enable_ntp_dhcp>

pw·/SYS/MB/NTP.NtpServerFromDhcp=

<enable_ntp_dhcp>

Parameters

<enable_ntp_dhcp>

true:

Enable getting NTP from DHCP server

false:

Disable getting NTP from DHCP server

Example

SET /SYS/MB/NTP.NtpServerFromDhcp=true

pw /SYS/MB/NTP.NtpServerFromDhcp=true

7.4.4. Query the Active NTP Server

Command and Response

GET·/SYS/MB/NTP.ActiveNtpServer

pr·/SYS/MB/NTP.ActiveNtpServer=

<server_address>

Parameters

<server_address>

NTP server address (IP address or URL)

Example

GET /SYS/MB/NTP.ActiveNtpServer

pr /SYS/MB/NTP.ActiveNtpServer=pool.ntp.org

7.4.5.

Set NTP server

Command and Response

SET·/SYS/MB/NTP.NtpServer=

<server_address>

pw·/SYS/MB/NTP.NtpServer=

<server_address>

Parameters

<server_address>

NTP server address (IP address or URL)

Example

SET /SYS/MB/NTP.NtpServer=pool.ntp.org

pw /SYS/MB/NTP.NtpServer=pool.ntp.org









Summary of Contents for RAP-B511-EU-K










































































Search results

Summary of Contents for RAP-B511-EU-K

Reviews:

Brands by name

Popular brands

Lightware RAP-B511-EU-K, User Manual

Search results

Summary of Contents for RAP-B511-EU-K

Reviews:

Brands by name

Popular brands