Lightware RAP-B511-EU-K Page 3 User Manual Download

Page: 3 / 73

RAP-B511 series

– User's Manual

Symbol Legend

The following symbols and markings are used in the document:

WARNING! Safety-related information which is highly

recommended to read and keep in every case!

ATTENTION!

Useful information to perform a successful procedure;

it is recommended to read.

INFO: A notice which may contain additional information. Procedure

can be successful without reading it.

DEFINITION: The short description of a feature or a function.

TIPS AND TRICKS: Ideas which you may have not known yet but can

be useful.

Navigation Buttons

Go back to the previous page. If you clicked on a link previously,

you can go back to the source page by clicking the button.

Navigate to the Table of Contents.

Step back one page.

Step forward to the next page.








Document Information

All presented functions refer to the indicated products. The descriptions

have been made during testing these functions in accordance with the

indicated Hardware/Firmware/Software environment:

Item

Version

Lightware Device Controller (LDC) software

v1.30.0b2

Lightware Device Updater2 (LDU2) software

v.1.2.2

Controller firmware package version

v1.0.1b1

Hardware

1.0

Document revision:

1.1

Release date: 11-06-2019

Editor: Judit Barsony

About Printing

Lightware Visual Engineering supports green technologies and

Eco-friend mentality. Thus, this document is made for digital usage

primarily. If you need to print out few pages for any reason, follow the

recommended printing settings:

▪

Page size: A4

▪

Output size: Fit to page or Match page size

▪

Orientation: Landscape

TIPS AND TRICKS: Thanks to the size of the original page, a border

around the content (gray on the second picture below) makes

possible to organize the pages better. After punching the printed

pages, they can be placed easily into a ring folder.









Summary of Contents for RAP-B511-EU-K










































































Search results

Summary of Contents for RAP-B511-EU-K

Reviews:

Related manuals for RAP-B511-EU-K

Brands by name

Popular brands

Lightware RAP-B511-EU-K, User Manual

Search results

Summary of Contents for RAP-B511-EU-K

Reviews:

Related manuals for RAP-B511-EU-K

Brands by name

Popular brands