Lightware MMX8x4-HT Series, User Manual

Page: 39 / 163

5. Device Concept MMX8x4-HT series – User's Manual 39
Applied firmware package: v1.2.2b5 | LDC software: v2.2.1
5.3. Video Interface
Summary of Video Interfaces
The table below shows the number of the video signals and connector types by model.
Model type
INPUT OUTPUT
Connector type Connector type
MMX8x4-HT400MC
TPS 4x
HDMI 4x
HDMI 4x
MMX8x4-HT420M
TPS 4x HDMI 2x
HDMI 4x TPS 2x
MMX8x8-HDMI-4K-A HDMI 8x HDMI 8x
The video crosspoint settings can be controlled by any of the following ways:
▪ Using Lightware Device Controller (for more information, see Crosspoint Menu section),
▪ Sending LW2 or LW3 protocol command, (for LW2 commands, see Switch One Input to One
Output section or LW3 commands, see the Switching and Crosspoint Settings section),
▪ Using the Autoselect function (for more details see The Autoselect Feature section),
▪ Using he front panel LCD menu (for more information, see Crosspoint Menu section), or
▪ Pressing the Source and Destination buttons on the front panel* (see Switching Operations
section).
* Only in MMX8x8-HDMI-4K-A model.
5.3.1. Port Diagram of MMX8x4-HT400MC
The following figure describes the port diagram of the MMX8x4-HT400MC matrix:
5.3.2. Port Diagram of MMX8x4-HT420M
The following figure describes the port diagram of the MMX8x4-HT420M matrix:
5.3.3. Port Diagram of MMX8x8-HDMI-4K-A and MMX8x8-HDMI-4K-A-USB20
The following figure describes the port diagram of the MMX8x8-HDMI-4K-A and MMX8x8-HDMI-4K-A-USB20
matrix:
  
