background image

 

   

HDMI20-OPTC series – User's Manual 

4

1. INTRODUCTION ...................................................................................6

1.1. Description ...................................................................................6

1.2. Box Contents ...............................................................................6

1.3. Compatible Devices ......................................................................6

1.4. Model Denomination ....................................................................6

1.5. About the Serial Number .............................................................6

1.6. Features of the Device .................................................................7

1.7. Model Comparison .......................................................................8

1.8. Typical Application .....................................................................8

1.8.1. Integrated System Application

 ........................................................ 8

1.8.2. Standalone Application

 .................................................................... 9

2. INSTALLATION ...................................................................................10

2.1. Mounting Options ......................................................................10

2.1.1. Truss Mounting - Receiver 

 ............................................................ 10

2.1.2. Standard Rack Installation 

 ............................................................ 10

2.2. Connecting Steps .......................................................................12

3. PRODUCT OVERVIEW ......................................................................13

3.1. Front View ..................................................................................13

3.2. Rear View -Transmitters ...........................................................14

3.3. Rear View - Receivers .................................................................15

3.4. Electrical Connections .............................................................16

3.4.1. Power Connectors

 .......................................................................... 16

3.4.2. Optical Connectors

 ......................................................................... 16

3.4.3. HDMI Input and Output Ports

 ........................................................ 16

3.4.4. Ethernet (LAN) Port

 ........................................................................ 16

3.4.5. USB Connector

................................................................................ 17

3.4.6. RS-232 Port

 ..................................................................................... 17

3.5. Multimode Single Fiber Extender Concept ................................17

3.5.1. Summary of Interfaces - Transmitter

 ............................................ 17

3.5.2. Summary of Interfaces - Receiver

 ................................................. 17

3.6. Optical Interface .......................................................................18

3.7. Video and Audio Interface ..........................................................19

3.7.1. Output Conversion Modes

 ............................................................. 19

3.7.2. Autoselect Feature

 ......................................................................... 19

3.8. Control Features ......................................................................20

3.8.1. USB Control Interface

 ..................................................................... 20

3.8.2. Ethernet Interface

 ........................................................................... 20

3.8.3. Serial Interface

 ................................................................................ 21

4. OPERATION .......................................................................................22

4.1. Powering on ...............................................................................22

4.2. Front Panel Operations ............................................................22

4.2.1. Function Button - Transmitter

 ........................................................ 23

4.2.2. Function Button - Receiver

 ............................................................. 23

4.2.3. Boot Button

 ..................................................................................... 23

4.3. Front Panel LCD Menu Operations ............................................24

4.3.1. System Settings Menu

 ................................................................... 24

4.3.2. Ports Menu

 ..................................................................................... 25

4.3.3.  EDID Menu

 ..................................................................................... 25

4.3.4. Health Menu

 .................................................................................... 26

4.3.5. Remote Menu

 ................................................................................. 26

5. SOFTWARE CONTROL – LIGHTWARE DEVICE CONTROLLER ...27

5.1. Install and Upgrade ..................................................................27

5.2. Running the LDC .........................................................................27

5.3. Establishing the Connection .....................................................28

5.4. Crosspoint Menu - HDMI20-OPTC-TX220-PRO ..........................29

5.5. Port Properties Window  ...........................................................30

5.5.1. HDMI Input Port -Transmitter

 ........................................................ 30

5.5.2. HDMI Output Port - Transmitter

 ..................................................... 30

5.5.3. Optical Input Port - Receiver

 .......................................................... 31

5.5.4. HDMI Output Port - Receiver

 .......................................................... 31

5.6. EDID Menu ...................................................................................32

5.6.1. Sources and Destinations

 .............................................................. 32

5.6.2. EDID Operations

.............................................................................. 32

5.6.3. EDID Summary Window

 ................................................................. 33

5.6.4. Editing an EDID

 ............................................................................... 33

5.6.5. Creating an EDID

 ............................................................................. 34

5.7. Control Menu ............................................................................34

5.7.1. RS-232 Tab

 ...................................................................................... 34

5.7.2. Ethernet Tab 

 ................................................................................... 35

5.8. Event Manager ...........................................................................35

5.8.1. The Event Editor

 .............................................................................. 36

5.8.2. Create or Modify an Event

 .............................................................. 36

5.8.3. Special Tools and Accessories

 ...................................................... 38

5.8.4. Clear One or More Event(s)

 ............................................................ 38

5.8.5. Export and Import Events

 .............................................................. 38

5.9. Settings Menu ............................................................................39

5.9.1. Status Tab

 ....................................................................................... 39

5.9.2. Network Tab

 .................................................................................... 39

5.9.3. Front Panel Tab

 ............................................................................... 39

5.9.4. Backup Tab (Configuration Cloning)

 ............................................. 40

5.9.5. System

 ............................................................................................ 41

5.10. Advanced View Window ............................................................41

6. LW3 PROGRAMMERS’ REFERENCE ...............................................42

6.1. Overview .....................................................................................42

6.2. Protocol Rules ..........................................................................42

6.2.1. LW3 Tree Structure and Command Structure (examples)

 ........... 42

6.2.2. General Rules

 .................................................................................. 42

6.2.3. Command Types

............................................................................. 43

6.2.4. Prefix Summary

 .............................................................................. 43

6.2.5. Error Messages

 ............................................................................... 43

6.2.6. Escaping

 .......................................................................................... 43

6.2.7. Signature

 ......................................................................................... 44

6.2.8. Subscription

 .................................................................................... 44

6.2.9. Notifications about the Changes of the Properties

 ..................... 44

6.2.10. Legend for the Control Commands

 ............................................. 44

6.3. System Commands ......................................................................45

6.3.1. Querying the Product Name

 .......................................................... 45

6.3.2. Setting the Device Label

 ................................................................. 45

6.3.3. Querying the Serial Number

 ........................................................... 45

6.3.4. Querying the Firmware Version

 ..................................................... 45

6.3.5. Resetting the Extender

 ................................................................... 45

6.3.6. Restoring the Factory Default Settings

 ......................................... 45

6.3.7. Locking Front Panel

 ........................................................................ 46

6.3.8. Enabling Dark Mode

 ....................................................................... 46

6.3.9. Setting the Dark Mode Delay

 ......................................................... 46

6.3.10. Setting the Dark Mode on the Remote Device

 ............................ 46

6.3.11. Setting the Rotary Direction of the Jog Dial Knob

 ...................... 46

Table of Contents

Summary of Contents for HDMI20-OPTC series












































































Reviews: