6. Programmer's Reference
DVIDL-OPT series – User's Manual
23
6.2.3. View Firmware Version
Description:
View the CPU firmware revision. To view other controller’s firmware version see the {FC}
command.
Legend:
The firmware version is 1.2.3.
6.2.4.
Compile Time
Description:
Shows the CPU firmware compile time.
Legend:
Explanation:
The firmware was made on 01.27.2017 at 13:55:24.
6.2.5.
View Installed Board
Description:
Shows the hardware name and revision of the installed board.
Explanation:
The device reports that it has an installed motherboard, the hardware revision is 1.0.
6.2.6.
View Board Information
Description
: Shows the firmware version and installed board together.
Explanation
: The device has an installed motherboard, the firmware version is 1.2.3.
Format
Example
Command {F}
{f}
Response
(FW:<FW_VER>)CrLf
(FW:1.2.3)
Format
Example
Command {CT}
{ct}
Response (Compiled:<DATE>•<TIME>)CrLf
(Compiled: Jan 27 2017 13:55:24)
Identifier
Parameter
<DATE>
Month, day and year
<TIME>
Hours, minutes and seconds
Format
Example
Command {IS}
{is}
Response (SL#•0•<MB_DESC>)CrLf
(SL•END)CrLf
(SL# SL# 0 DVIDL-OPT-TX200 SCH_1.0 PCB_1.0)
(SL END)
Format
Example
Command {FC}
{fc}
Response (CF•<DESC>)CrLf
(CF END)CrLf
(CF DVIDL-OPT-TX200 FW:1.2.3)
(CF END)
6.2.7.
View All Port Status
Description
: Shows the actual status of all input and output ports.
Explanation
: Video signal is present on the input, display device is connected to the second output.
Legend for the Transmitter:
Legend for the Receiver:
▪
5V
: The connected source sends +5V.
▪
Signal detected
: Video signal is present (TMDS stream can be recognized).
▪
Hotplug detected
: Sink is connected to the output.
6.2.8.
Restart the Device
Description:
The device can be restarted without unplugging the power source.
Explanation
: The device reboots without any response.
Format
Example
Command {PS}
{ps}
Response (PS•<INPUT_D>,OUTPUT_D)CrLf
(PS 3,01)
Bit values
0
1
2
3
INPUT_D
No signal
5V
-
Signal detected
OUTPUT_D
No signal
-
Hotplug detected
-
Bit values
0
1
3
INPUT_D
No signal
-
Signal detected
OUTPUT_D
No signal
Hotplug detected
-
Format
Example
Command {RST}
{rst}
Response