10
Setting Timer 1 (to 9) ...continued
First decide if this timer should control the lights
‘Everyday’ or only on ‘Weekdays’ or only on
‘Weekend’ days.
Next set the ‘AREA’ code this timer controls. e.g.
Area 1 is the first button on the App or keyfob.
Light Symphony has 29 usable area codes (or
zones).
Use the UP/DOWN keys to adjust the ‘On-Time’
hours. You will notice as you
adjust past 00 hours the time changes to show ‘DUSK’. Using the Dusk setting will
automatically adjust the on-time each day to suit
the calculated sunset time.
As you navigate past the on-time, you’ll notice
the cursor allows the ‘Off’ field to be changed to
‘For’. This is a useful feature for pond pumps
and filters that need to run for a set period each
day.
Lastly, navigation key to the ‘Off-Time’ and set
to your preference. Again, you will notice as you adjust the hours past 00 the off-time
changes to show “DAWN”. Using the Dusk setting will automatically adjust the off-
time each day to suit the calculated sunrise time. Note, setting the On and Off time the
same will disable a timer.
Navigate to BACK field and press “
OK
” when
done to store and exit the menu.
These settings will be stored even when the pow-
er is lost.
Section 3
Timer Setup
TIMER 1: Everyday
AREA: 1
ON at DUSK
For : 60mins
BACK
TIMER 1: Everyday
AREA: 1
ON at DUSK
OFF at
23:00
BACK
TIMER 1:
Everyday
AREA: 1
ON at 00:00
OFF at 00:00
BACK
