4
Fitting Your Headset
Fitting your headset properly is the key to the
comfortable use and the superior Active Noise
Reduction (ANR) capabilities of Zulu PFX. A solid
seal around your entire ear and a symmetrical fit
across the top of your head are necessary for you to
experience peak performance from the ANR feature.
The following steps will assist you in achieving the
proper fit:
1. Extend the sliders fully.
2. Place the headset on your head and compress
the sliders slowly and evenly on each side until
the head pad rests softly on the top of your head.
3. Adjust the ear cups to ensure the ears are fully
inside the ear seal and there is uniform pressure
on your head.
4. Position the microphone 1⁄8 inch from your mouth;
face the side of the microphone with the four
screws and Lightspeed logo away from you.
(Remove the mic windscreen to see these features.)
Getting Started
This side of the microphone
should face
away
from you.
Installing the CPU clip (optional)
The steel CPU clip allows you to securely position
the Zulu PFX CPU on your visor or in a map pocket.
To install, position the clip on the battery door, align
the holes in the CPU with the mounting holes in the
battery door. Use the supplied screws to attach the clip.
Summary of Contents for Zulu PFX
Page 1: ...Zulu PFX User Guide ...
