6
Fitting Your Headset
Fitting your headset properly is the key to
comfortable use and superior Active Noise
Reduction (ANR) capabilities. To gain peak
performance from our ANR feature, it is necessary
to have a solid seal around your entire ear, together
with a symmetrical fit on your head.
The following tips will assist you in achieving the
proper fit.
1. Extend the sliders fully.
2. Place the headset on your head and compress
the sliders slowly and evenly on each side until
the head pad rests softly on the top of your head.
3. Adjust the ear cups to ensure the ears are fully
inside the ear seal and there is uniform pressure
on your head.
Getting Started
4. Position the microphone 1⁄8 inch from your mouth;
face the side of the microphone with the four
screws and Lightspeed logo away from you.
(Remove the mic windscreen to see these features.)
If you need a tighter fit to ensure a good seal
around your ears, please call Customer Service at
800-332-2421 or email [email protected]
to receive assistance. There are a number of possible
solutions that will work and the team will guide you
through the process to make sure you get the very
best performance.
This side of the microphone
should face
away
from you.
Summary of Contents for Delta Zulu
Page 1: ...Delta Zulu User Guide...
