background image

40

5. W

arranty & 

Specifications

2. Daily Operarion

1. Overview

3. Optional 

 

Accessories

4. T

roubleshooting

FIVE-YEAR LIMITED WARRANTY

Our Service Department (800.732.8999, 5 a.m. – 5 p.m., PST) will handle 

all your repair/replacement needs. 

Customers outside the U.S should 

contact their local reseller.

SECTION 6: 

 

WARRANTY, SAFETY & 
SPECIFICATIONS

Lightspeed Classroom Audio Systems are guaranteed against 

malfunction due to defects in materials and workmanship for a period 

of FIVE (5) YEARS, beginning at the date of the purchase invoice. If 

such malfunction occurs, the product will be repaired or replaced (at 

Lightspeed’s option) without charge during the warranty period.  

Lightspeed’s Warranty Exchange Program applies to all infrared 

systems within the five (5) year warranty period. If an infrared product 

or component has an issue that requires service, a refurbished 

replacement will immediately be sent to the customer to minimize 

downtime. Customers will receive the exchange product(s) or 

component(s) within 2-3 days. A prepaid return label will be included 

with exchanged products so original malfunctioned equipment can be 

returned to Lightspeed. Any exchanged equipment will remain covered 

under the original five (5) year warranty.  
1.  Warranty on infrared microphones is FIVE (5) YEARS. 
2.  Warranty on Lightspeed NiMH rechargeable batteries is one (1) year. 
3.  Prepaid shipping label provided by Lightspeed for warranty repairs 

within the U.S. 

Customers outside the U.S. should refer to the 

Lightspeed website (www.lightspeed-tek.com) for warranty repair 

instructions. 

4.  Warranty does not extend to finish, appearance items, or 

malfunctions due to abuse or operation other than specified 

conditions, nor does it extend to incidental or consequential 

damages. Repair by other than Lightspeed or its authorized service 

agencies will void this guarantee. Information on authorized service 

agencies is available from Lightspeed Technologies, Inc.

Summary of Contents for Cat 885

















































Reviews: