Lightspeed 955Access, User Manual

Page: 15 / 40

15
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Tr
oubleshooting
5. W
arranty
, Safety
& Specifications
2. OPERATING THE FLEXMIKE
Once the Flexmike is charged, follow these steps to set it up for use.
1. Remove the Flexmike from the
cradle charger and put it on by
connecting the magnetic clasps
behind your neck. Adjust the
lanyard so that the Flexmike is at
the top of the collarbone
2. The Flexmike will automatically
power on and mute when it is
removed from the charger. This will
automatically power on the 955
Access as well.
3. The microphone volume on the
Flexmike is set at the factory to the
mid point.
4. While speaking in a normal voice,
fine-tune the microphone volume
on the front of the 955 Access
up or down. Proper volume level
should be as follows:
• Your voice should be clearly
heard by another person on the
other side of the room.
• You should barely be able to
hear your own voice.
• There should not be any audio
“feedback” or squealing
outside of 2-3 feet (if there is,
turn the volume down slightly).
REMEMBER: This equipment
supplements the user’s voice so they
are able to speak in a conversational
tone. Having the volume set too high
will result in feedback and listener
fatigue.
5. Once initial volume level is set,
walk around the room and listen
for overall audio quality.
6. If further fine-tuning is required,
you may need to adjust the Tone
Control on the front of the 955
Access.
.
AUDIO IN MICROPHONE TONE
POWER
MIN
1
MAX MIN MAX TREBLE BASS
2
AUDIO OUT
MIN MAX