9
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Tr
oubleshooting
5. W
arranty
, Safety
& Specifications
FLEXMIKE CONTROLS AND CONNECTIONS
1. POWER/MUTE SWITCH:
press and hold to power on, press to
mute, press and hold to power off.
2. MIC 1 STATUS:
lighted to indicate microphone is registered as
MIC 1
• Blue: solid = normal operation; Blue: flashing = linking in
process
• Red: solid = muted; Red: flashing = muted while linking in
process
3. MIC 2 STATUS:
when using a second microphone, this LED is
lighted to indicate microphone is registered as MIC 2 (same
behavior as MIC 1 status light above)
4. EARBUD CONNECTION*:
connect the earbud for monitoring
(*for use with Flexcat Pods only)
5. CHARGING/LOW BATTERY INDICATOR:
lights red when
charging, green when fully charged. When in operation, turns red
to indicate low battery.
6. MICROPHONE VOLUME UP/DOWN
7. AUDIO INPUT:
connect audio source to send to Redcat Access
8. LANYARD INTERFACE:
insert the lanyard into this hook to wear
the Flexmike.
9. BATTERY DOOR:
remove the battery door to replace the
rechargeable battery pack
10. REGISTRATION:
(inside battery compartment - not shown) only
used when adding or replacing Flexmike.
11. SYSTEM ID LABEL
1
10
9
8
7
6
5
4
3
2
11
Summary of Contents for Redcat
Page 1: ...U s e r M a n u a l Classroom Audio System 1 POWER 2...
Page 2: ......
