29
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Tr
oubleshooting
5. W
arranty
, Safety
& Specifications
ALL PROBLEMS
: Most Problems are
related to low battery power.
SOLUTION:
Battery Check
• Confirm batteries are charged
each night. A blinking red light on
the power button indicates a low
battery.
• Confirm proper batteries are
used. The Flexmike requires the
Lightspeed NH2.4V rechargeable
battery pack. The Sharemike
requires the Lightspeed BA-
NH2APK rechargeable pattery
pack.
• Make sure the microphones obtain
a full charge. A full charge takes
8-9 hours.
• When plugging the charging cable
into the transmitter, ensure the red
charging light turns on. The green
light will turn on when a full charge
is reached.
PROBLEM:
Microphone does not
indicate a “Ready” signal (solid
blue or red light)
SOLUTION:
Follow these steps to
ensure the system is ready to use.
• Ensure the power button on the
microphone is turned on. Once
turned on, the blue light should
begin blinking.
• Power the microphone off, then on
again after a few seconds. Wait for
up to 30 seconds for the blue light
to turn solid, indicating READY for
operation.
PROBLEM:
Low Volume or Feedback
SOLUTION:
Follow these steps to
eliminate low volume or feedback.
• Check volume level on the
amplifier. If the volume is too
high, feedback will occur. Adjust
accordingly.
• Adjust the volume level on the
Flexmike.
PROBLEM:
No Sound From Amplifier
SOLUTION:
Follow these steps
to produce sound from Redcat
Access.
• Confirm that the blue POWER light
located on the front panel of the
Redcat Access is on.
• Confirm the microphone is linked
to the Redcat Access. The mic 1
status light will be green on the
Redcat Access indicating the
microphone is linked.
• Confirm that the microphone
is turned on. There will be a
solid blue light on the top of
microphone to indicate it is
powered on and ready.
• Confirm that microphone is not
muted. A solid red light on the top
of microphone will indicate it is
muted.
Note:
Most problems are directly related to low battery power. Please run
through the “Battery Check” items first. For remaining troubleshooting, use
known good, fully-charged batteries.
If you review these instructions and still have questions, call Lightspeed
Technical Services at 800.732.8999, 5 a.m. – 5 p.m., PST.
Customers outside
the U.S. should contact their local reseller.
TROUBLESHOOTING
COMMON PROBLEMS AND SOLUTIONS
Summary of Contents for Redcat
Page 1: ...U s e r M a n u a l Classroom Audio System 1 POWER 2...
Page 2: ......
