LIGHTSIDE LZ-400T, User Manual

Page: 6 / 8

REMOVE PACKAGE AND CHECK
1. Open carton to check whether all necessary spare parts include accord the
specification list. Please contact distributor if there are something missed.
2. Check the appearance of machine and power line to see whether they have
some obvious damage. Please contact distributor once you find something and stop
to use fog machine.
INSTALLATION
1. Take away all pack material especially the spray mouth.
2. Set in the horizontal direction and open the cover of liquid can.
3. Add high quality fog liquid in the machine and screw the cover of liquid can.
Bad quality fog liquid will damage fog machine.
4. Plug the plug of remote console in the socket of the back of machine.
OPERATION
1. Connect the power line to the power socket with earth line. Turn the switch at “ On “
and the machine heat. The green LED of line console will light once the machine finish heat.
2. Press red key, the machine will spray fog (Press it as long as you need).
3. The green LED light or not means the machine can spray fog or heat itself.
4. Can set the machine at a high place (with hanger) or on the ground. Do not spray fog
to people directly and the lean angle should less than 15 。 .
5. Often check whether there has enough fog liquid in machine. The operation will make
big damage to the machine if there has no fog liquid.
6. If the fog is small, plum has noise or there has no fog, please power off and check fog
liquid, fuse, the connector of remote console and power plug. If the problem could not
be solved after check these parts, please stop check and send it back to distributor for repair.
SPECIFICATIONS
Power
:
400W
Voltage
:
AC110V
、
220-250V 50/60Hz
Heat up Time: 4 minutes
Weight
:
1.8KG
Size
:
29 x 15 x 14 cm
Tank capacity
:
1L
Output
:
18000 cu.ff/min
4
ENGLISH