INSTALLATION INSTRUCTIONS
2
3
REMOTE FUNCTIONS
The candle switch must be turned to “ON” in order for
the remote control to function.
4
2
ON/OFF
SWITCH
ON/OFF
The ON/OFF switch is located on the bottom of the
taper. To turn the candle ON/OFF remove the candle
from the base and use this switch. Once the candle is
turned to the “ON” position, it can be controlled using
the remote, until it is manually turned to “OFF”.
SUCTION CUP HOLDER (OPTIONAL)
Carefully, clip the suction cup holder onto the candle
base as shown in the diagram. To ensure a firm bond,
surfaces should be totally free of dirt and soap film
before attaching the suction cup. Rinse the inside of the
suction cup under warm water then shake off the
excess water. Press the suction cup firmly in place,
making sure there are no air bubbles between the cup
and the mounting surface.
RELEASE TAB
ON
Flicker
Steady
8H
4H
OFF
OFF
Steady Option
8 Hour Timer Option
{candle will turn on the
same time every day
for 8 hours}
ON
Flicker Option
4 Hour Timer Option
{candle will turn on
the same time every
day for 4 hours}
