Page 3 of 13
SC910D/SC910W DMX CONTROLLER
Version 2.1
OWNERS MANUAL
11/02/2020
www.lightronics.com
Lightronics Inc.
509 Central Drive Virginia Beach, VA 23454
757 486 3588
DESCRIPTION
The SC910 is designed to be a compact DMX controller
and remote station control device. When used as a
standalone controller, the SC910 is capable of
independently controlling 512 channels of DMX and
has the ability to record and recall 18 scenes. The scene
control is broken down to 10 real time fader controls and
8 push buttons with user defined fade times. This device
features the ability to set a fixed output value or park
DMX channels. The SC910 is able to connect to a DMX
data chain with another DMX controller. The SC910 can
operate with other types of Lightronics smart remotes
and simple remote switches to recall 16 of the 18
available scenes from additional locations. Scenes 17 &
18 are only available from fader 9 & 10 on the SC910.
These remote units will connect to the SC910 via low
voltage wiring.
The SC910 is the ideal device for architectural control
of DMX512 lighting systems. It can be used as a backup
to a DMX console, great for controlling LED lighting
for special events or anywhere that requires quick, easy
control of a full universe of DMX.
SC910D INSTALLATION
The SC910D is portable and is intended to be used on a
desktop or other suitable horizontal surface.
SC910D POWER & DMX CONNECTIONS
A 120 Volt AC power outlet is needed for the power
supply. The SC910D includes a 12 Volt/ 3 Amp, DC
power supply that has a 2.1mm barrel connector with
POSITIVE center pin.
TURN OFF ALL CONSOLES, DIMMER PACKS, AND
POWER SOURCES BEFORE MAKING EXTERNAL
CONNECTIONS TO THE SC910D.
DMX connections are made using 5 pin XLR
connectors located on the rear edge of the SC910D
Connector Pin #
Signal Name
1
DMX Common
2
DMX DATA -
3
DMX DATA +
4
Not Used
5
Not Used
SC910D REMOTE DB9 CONNECTOR PINOUT
Connector Pin #
Signal Name
1
Simple Switch Common
2
Simple Switch 1
3
Simple Switch 2
4
Simple Switch 3
5
Simple Switch Common
6
Smart Remote Common
7
Smart Remote Data -
8
Smart Remote Data +
9
Smart Remote V
SC910D SIMPLE REMOTE CONNECTIONS
The DB9 connector pins 1 - 5 are used for connecting
simple switch remotes.
An example with two switch remotes is shown below.
The example uses a Lightronics APP01 switch station
and a typical pushbutton momentary switch. If the
SC910D simple switch functions are set to factory
default operation, then the switches will operate as
follows:
1.
Scene #1 will be turned on when the toggle
switch is pushed up.
2.
Scene #1 will be turned off when the toggle
switch is pushed down.
3.
Scene #2 will be turned on or off each time the
pushbutton momentary switch is pressed
.
SC910D SMART REMOTE CONNECTIONS
The SC910D can operate with two types of smart remote
stations. This consists of Lightronics pushbutton
stations (AK, AC and AI series) and the AF fader
stations. Communication with these stations is over a 4
wire daisy chain bus which consists of a dual twisted
