Page 3 of 4
FXLE30C4N LED FIXTURE
Version 1.0
OWNERS MANUAL
12/04/2020
www.lightronics.com
Lightronics Inc.
509 Central Drive, Virginia Beach, VA 23454
757 486 3588
value chosen is irrelevant. 2 colors selected = 12
steps, 3 colors selected = 14 steps. 4 colors selected =
15 steps.
DMX OPERATION
Use the DMX-Addr menu to set the unit DMX starting
address. The range is 001 - 512.
Once you select the DMX mode and address, press
ENTER to ensure that if power is lost, the fixture
will return to the preset DMX mode and address.
The fixture has 2 DMX modes: 4 channel and 9
channel. For proper DMX operation, the highest DMX
address setting should be 509 (4 channel mode) and
504 (9 channel mode)
4 CHANNEL DMX ASSIGNMENTS
DMX CHN FUNCTION
1
Red Intensity (0-255)
2
Green Intensity (0-255)
3
Blue Intensity (0-255)
4
White Intensity (0-255)
9 CHANNEL DMX ASSIGNMENTS
DMX CHN FUNCTION
1
Overall Intensity (0-255)
2
Strobe (Speed 0-255) (Color Required)
3
Effect
0-5: No Effect
6-100: Colors Jump
101-150: Gradient Color Change
151-200: Colors Pulse
201-255: Sound Control
4
Effect Speed (0-255)
5
Red Intensity (0-255)
6
Green Intensity (0-255)
7
Blue Intensity (0-255)
8
White Intensity (0-255)
9
Color Temperature
0:Off, 1-255: 2000K-12000K)
MAINTENANCE AND REPAIR
TROUBLESHOOTING
Fixture will not power up.
Check that you have power applied to the
unit.
Check the fuse located on the back panel of
the fixture.
Unable to control fixture.
Check that the LCD display currently
indicates the correct DMX channel mode
and is addressed properly. If not, select the
proper channel mode and address then
press ENTER.
Check the LCD display on the fixture; if there
is a flashing decimal after the DMX value, a
valid DMX signal is present. If there is not a
decimal showing, then a valid DMX signal
is not present.
Check the DMX control cable for continuity
and polarity.
Remove the fixture from the DMX chain and
all other DMX devices.
Check the address settings or patch at the
controller.
CLEANING
DISCONNECT THE POWER CORD BEFORE
HANDLING THE UNIT.
A mild detergent can be used sparingly if needed.
Apply to cloth only; do not apply detergents directly to
fixture. Do not use chemicals or solvents when
cleaning the fixture. Ensure that the unit is dry before
use.
REPAIR
The only FXLE30C4N user serviceable part is a 5 mm
x 20 mm externally accessible fuse on the rear panel.
DISCONNECT THE POWER CORD BEFORE
CHECKING OR REPLACING THE FUSE.
Replace fuse ONLY with 5.0 Amp, 250VAC, fast acting
fuse. Requires a #2 Philips head screwdriver to
access. Use care to not overtighten.
Internal service on the unit by other than Lightronics
authorized agents will void the warranty.
If service is required, contact the dealer from whom
you purchased the item, or contact the Lightronics,
Service Department, 509 Central Drive, Virginia Beach,
VA 23454. Tel: 757 486 3588.
DANGER DO NOT OPEN UNIT
RISK OF ELECTRIC SHOCK
RISK OF FIRE
