![background image](http://html.mh-extra.com/html/lightronics/as40l/as40l_owners-manual_1914986003.webp)
Page 3 of 5
AS40L COMPACT DIMMER
Version 1.0
OWNERS MANUAL
10/08/2021
www.lightronics.com
Lightronics Inc.
509 Central Drive, Virginia Beach, VA 23454
tel 757 486 3588
“bounce” condition may be imposed on several of
the chase patterns by setting one of the DIP
switches. The bounce condition causes the chase
pattern to run in alternating directions.
The chase step time may be controlled for up to 64
seconds per step. Step fade time is proportional to
the step time. If a channel is in the relay mode
during chaser operation - it will “snap” on and off
(zero fade time). The tables below show the details
of chaser settings.
CHASER MODE SWITCH FUNCTIONS
MAINTENANCE AND REPAIR
TROUBLESHOOTING
•
Check that you have power applied to the
dimmer.
•
Check that all light fixtures are functional.
•
Check the fuses.
•
Check the LMX control cable.
•
Check the settings of the dimmer DIP switches.
•
Check the console setup for correct patching
REPAIR
The only AS–40L user serviceable parts are
externally accessible fuses. Replace fuses ONLY
with 5 Amp, 250VAC, fast blow fuses. Internal
service on the unit by other than Lightronics
authorized agents will void the warranty. If service is
required, contact the dealer from whom you
purchased the dimmer, or Lightronics, Service
Department, 509 Central Drive, Virginia Beach, VA
23454. Tel: 757 486 3588.