Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • D0907
Job Information
Type:
Tangent
™
Track Lighting System
FX
Page 2 of 3
Direct Mounting
Toggle bolts and a 3/4" “goof” washer are furnished with the Surface Mount
Anchors. Surface mount anchors may also be attached directly to surface
using other suitable hardware. Top of the track sits 5/16” below the
mounting surface.
For continuous runs, surface mount anchors should
be placed no more than 3' apart if ceiling
mounted and 2' apart if wall mounted.
Additionally, surface mount anchors
should be placed 6" from each
end of the track run.
For individual track
installations, use 3
anchors for a 4'; 4
anchors for an 8';
and 5 anchors for a 12'.
For Regressed Edge Panels and 9/16”-15/16” T-Bars.
Mounts onto T-Bar by rotating clip. Secures to track with integral set screw.
Regressed
Edge Panel
T-Runner
5/16 in
13/32 in
9/16 in
15/16 in
1 1/8 in
[29 mm]
3/8 in
[9 mm]
Track Mounting and Power Feed Systems
9/16 - 15/16 in
Square
Edge Panel
T-Runner
1 in
[25 mm]
2 3/8 in
[61 mm]
3/4 in
[19 mm]
3/8 in
[9 mm]
Grid Clip Detail
[24 mm]
7/8 in
1/4 in
[7mm]
Surface Power Feed
Mounts to a 3/8" NM (non-metallic)
or armoured cable connector.
Mounts anywhere along track.
Max load 20 amps @ 120V, 60Hz
FX48
Silver
Surface Mount Anchors
Attach to track at any point.
Provided with toggle bolts and
a 3/4" “goof” washer. Secured
to track with integral set screw.
Track and Surface Mount Anchors
sold separately.
FX25
Clear Anodized (Pack of 5)
J-Box Feed Canopy Kit
Mounts anywhere along track
for power feed from a 4”
octagonal outlet box. Max
load 20 amps @ 120V, 60Hz
FX61
Silver
FX61WH
White
Grid Ceiling Mounting Clips
For Square Edge Panels and 9/16”-15/16” T-Bars.Mounts onto
T-Bar by rotating clip. Secures to track with integral set screw.
FX89
Silver (Pack of 5)
5/16 in
[8mm]
FX87
Silver (Pack of 5)
