1076
Lytecaster, 5" Aperture, Basic Baffle Reflector Trim
Page 2 of 2
Philips Lightolier
t: (508) 679-8131
w: www.lightolier.com
1076 October 15, 2012
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2010. All rights reserved.
Features
1. Reflector:
Hydroformed aluminum, .040” thick (18 ga.): non-yellowing,
scratch resistant Perma White finish, 88% reflectance; white trim flange.
2. Step Baffle:
Molded high heat plastic with stepped conical surface for low
brightness, matte black or gloss white finish.
3. Frame-In Kit:
(1002P1 standard frame shown). Other frames listed above
and shown on the right. See Frame-In Kit specification sheets for more details.
Options & Accessories
Medium-Base PAR30 Socket Extender:
1968 - For use w/short neck PAR30 lamps in P1 and Lytening housings.
Labels
UL (Suitable for Damp Locations), I.B.E.W.
Use quick calculator chart to determine the spacing of 75 Watt PAR30
FL units (Black) for a desired level of illumination. Conversion Factors:
75W PAR30 FL, White, F.C. x 1.1.
Conversion Factor: 75W PAR30 FL; White, C.U. x 1.1 65W BR30
FL; Black, C.U. x .75; White, C.U. x 1.0.
To convert lighting data for a lower wattage incandescent lamp of the
same
type
, multiply the footcandle (or candlepower) values by the ratio of the
lumens of the two lamps.The coefficients of utilization remain the same.
