12
Specifications subject to change without notice
Specifications
MODEL- Strike
S4.500.1
S4.1000.1D
S4.200.2
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4
Load Per Channel
300 Watts x 1
250 Watts x 1
50 Watts x 2
2
Load Per Channel
500 Watts x 1
500 Watts x 1
100 Watts x 2
4
Load Bridged (Mono)
200 Watts x 1
S4.1000.1D Only-1
Load
1000 Watts x 1
Amplifier Fuse Rating (Amp/Type)
(2) 30A / AWG
(3) 30A / AWG
(1) 30A / AWG
Dimensions:
Height
2.0" (5.08cm)
2.0" (5.08cm)
2.0" (5.08cm)
Width
10.5" (26.67cm)
10.5" (26.67cm)
10.5" (26.67cm)
Length
12.25" (31.11cm)
15.75" (40.00cm)
8.25" (47.24cm)
MODEL- Strike
S4.400.2
S4.600.2
S4.400.4
S4.600.4S
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4
Load Per Channel
100 Watts x 2
150 Watts x 2
50 Watts x 4
60 Watts x 2
F
125 Watts x 2
R
2
Load Per Channel
200 Watts x 2
300 Watts x 2
100 Watts x 4
100 Watts x 2
F
200 Watts x 2
R
4
Load Bridged (Mono)
400 Watts x 1
600 Watts x 1
200 Watts x 2
200 Watts x 1
F
400 Watts x 1
R
Amplifier Fuse Rating (Amp/Type)
(2) 30A / AWG
(2) 40A / AWG
(2) 30A / AWG
(2) 40A / AWG
Dimensions:
Height
2.0" (5.08cm)
2.0" (5.08cm)
2.0" (5.08cm)
2.0" (5.08cm)
Width
10.5" (26.67cm)
10.5" (26.67cm)
10.5" (26.67cm)
10.5" (26.67cm)
Length
12.25" (31.11cm)
15.75" (40.00cm)
12.25" (31.11cm)
15.75" (40.00cm)
Signal-to-Noise Ratio
>70dB A-weighted
Input Sensitivity
100mV - 5V
Crossover (S4.1000.1D only)
12dB/octave Low Pass only
Crossover
12dB/octave High/Flat/Low Switch
Crossover Frequency (S4.1000.1D only)
variable from 50Hz to 250Hz, Low Pass Only
Crossover Frequency
variable from 50Hz to 500Hz
Channel Separation
50dB
Subsonic Filter (S4.1000.1D only)
Variable 15 - 40Hz
NOTE
:
Staggered Power (S4.600.4S Only)
- Two separate power supplies with two separate
output sections for the front and rear channels. In essence, it is 2 completely separate
amplifiers sharing the same chassis. More power is created on the rear channels to
allow the performance to be delivered where it is needed most.
MODEL- Strike
S4.1000.1D (2 amplifiers strapped together)
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4
Load
1000 Watts x 1
2
Load
2000 Watts x 1
Summary of Contents for Strike S4.1000.1D
Page 62: ...Italiano 62 NOTA...
Page 63: ...63 NOTA...