LIGHTMED TruScan Pro
–
Operator’s Manual Rev. No. 01
Page
12
of
109
For other personnel that may be exposed to reflections or backscatter, they must wear safety
glasses or goggles. In any case, NEVER look directly at the treatment laser beam as severe eye
injury is likely to occur. Avoid looking into the LDU or console aperture.
2.4
Electrical Hazards
The TruScan Pro laser is designed to apply the International Standards for Medical Equipment.
This laser system is designed to operate with three terminal prongs for AC voltage where the third
pin serves as the earth-grounding prong.
WARNING!
It is not safe to operate the TruScan Pro laser without an earth-grounding receptacle
as there will be a possible risk of electrical shock!
No cover or housing will need to be removed by the operator or user. Only authorized and trained
Service Technicians will be allowed to remove the cover or housing assembly to minimize the
possibility of laser radiation exposure and high current or voltage.
2.5
Safety Controls and Features
The system is equipped with numerous safety controls and features that are compliant with the
standard regulations. More details are shown below:
Figure 1: Safety Controls and Features.
