ENGLISH
Static, Auto or Sound mode:
The device contains automatic programs that run according to fixed schemes
(Auto)
or are
recalled via the built-in microphone to match the music
(Sound)
. The selection of the respective
mode takes place via the menu directly on the device.
If you connect several devices of the same type via DMX, they can be controlled simultaneously
via the master device. To do this, set the desired function "
Master
" on the first device of the line,
the other devices of the series must now be set as "
Slave
". Now the first device of the line gives
the function to all other devices and all devices run simultaneously.
Operation:
Start:
Connect the device to the mains and wait a few seconds until it is ready for operation.
SD Play setting:
The system only supports FAT32 file system, if using new card, it must be firstly ormatted into
FAT32 format.
The system only supports short file name. File name( folder name included) consists of no more
than 8 characters name and 3 extensions made up of letters, numbers and underlines, with utf-8
characters.
SD card must be dedicated, don’t mix storage with others file, it can support no more than 100
files, very file storage is no more than 255 files.
Show list: User can edit show list by text editor(notepad), extension name is .Prg. Show list
consists of play file name, play speed, play time, each divided by “,”. One show item on one line.
Such as, a show consisted of file1.ild,file2.ild,file3.ild, the play speed of file1.ild is 12K, repeat 3
times, file2.ild play speed is 20K, play 1 time, file3.ild, play speed is 18k, play 4times, so prg1.prg
content as below:
File1.ild,12,3 File2.ild,20,1 File3.ild,18,4
When a new folder is created, it needs to create a PRG file sharing the same name with the folder
in the new folder. All shows which are ready to be played in the folder must be edited into the
PRG file. The play speed the speed in “key seek” model. Such as, in “aurora” folder, aurora.prg
file is created with new ILDA, this file must be added into PRG file, so that it will be easy to be
found when choosing the play file, and it will be played as your required speed.
This system only supports standard ILDA files with extensions of “ild”.
