Lighthouse Worldwide Solutions REMOTE ActiveCount, Installation Manual, Page: 22 / 54

Lighthouse REMOTE ActiveCount Installation Guide
3-8 248083413-1 Rev 4
Remote Switch RJ-45 Pinouts
Table 3-5 displays the terminal block pinouts for the Remote Switch.
Attach the Cat-5 Communication cable from the Controller Switch
connector to the terminal block in the Remote Switch as shown in
Figure 3-4.
Figure 3-4 Terminal Block Wiring - Remote Switch
Wire the cable according to the wiring diagram shown in Figure 3-5.
Figure 3-5 Remote Switch Wiring
Table 3-5 Switch Connector - Terminal Block Pinouts
Pin Signal Name
1 24V IN
2 TX OUT
3 RX IN
4 GND