.
www.lightheadedlighting.com
P.
T.
F.
604.464.5644 1.800.464.9544 604.464.0888
R2P-IC3A-S-TLW-installation
•
Subject to change without notice • REV 2021.06.30
Install Guide
R2P-IC3A-S-TLW
I/C BASEPLATE
This product must be installed in accordance with the
applicable code by a person familiar with the construction
and operation of the product and the hazards involved.
Read all of these instructions before installing.
WARNING:
Rated for non-insulated ceilings only (non IC rated)
WARNING:
Disconnect power prior to servicing or installing.
Optional Vertical mount.
Align holes and use same
screws.
2
7
Horizontal mount use
provided sheet metal
screws.
1
Line up bottom edge of
hanging bars with bottom of
wood joist and hammer in
tabs. Nail or screw hanging
bars into place
4
Slide hanging bars onto
housing base plate
3
Place adapter ring assembly
inside of baseplate. Utilize
slots on extension arms
which fit best with wood
thickness. Assemble with
provided hex machine
screws to hold in place.
8
Use provided machine
screws to assemble
extension arms to adapter
ring.
6
5a — Position trim hole to
desired location by sliding
housing
5b — Use centering holes on
either side of base plate to
line up a row of fixtures
5a
5b
5b
To lock baseplate in place,
bend tab with pliers over
hanging bar.