ELECTRICAL CONNECTIONS
The Xtreme series lights are fitted with a high current waterproof 4 pin electrical connector.
Included in the kit is the mating connector fitted with short lengths of cable for integration with an
appropriate wiring harness. i.e. Harness must be capable of 15A per light.
If existing wiring harness is suitable the included connector needs to be fitted directly to your existing
driving light circuit.
CONNECTOR WIRE COLOUR IDENTIFICATION
1.
Red: Positive for full intensity– connect to positive wire on relay / vehicle harness
2.
Black: Negative - connect to negative (earth)
3.
Blue: Positive for day time positioning (optional) - connect to ignition signal wire
4.
Yellow: Positive for night time positioning (optional) - connect to low beam signal wire.
NOTE: To operate night time positioning, ensure blue wire is also connected to ignition signal wire.
Warning: Only connect positioning lights in locations where they are legal to use. Please check local
laws.
LIGHTFORCE AUSTRALIA
VENOM & GENESIS LED USER INSTRUCTIONS
V1.0 / DECEMBER 16
VENOM & GENESIS LED INSTALLATION INSTRUCTIONS
