Powering ViewConn
ViewConn comes with a set of 4 AA low self-discharge NiMH camera
grade batteries and an external battery charger. These batteries come
pre-charged and may be used immediately. The green power light will
slowly change to orange to alert you that the batteries are running low.
When the light is red, battery power is almost gone.
Battery life should be approximately 4 hours with recharging time about
2 hours. Charging a second set of batteries while using the
first can give you uninterrupted power. In an emergency,
AA Alkaline batteries may be used, but they may last less
than one hour and should not be left in ViewConn.
It is not necessary to remove ViewConn’s ruggedized cover
to install or change the batteries. Simply slide the battery
cover off. Make sure you install the batteries in the proper
direction and slide the battery cover back into position.
When properly positioned, the cover will fit tightly.
ViewConn can also be powered using the AC adapter which is included.
AC adapters and battery chargers are available with US, European, UK or Australian style plugs.
