Actual product characteristics may vary
www.lightculture.com.au
–
LED Neon must always be used in conjunction with a certified
24V DC power supply.
–
Check the polarity of the connector before inserting the front
connector and switching on the mains power.
–
To minimise voltage drop and ensure consistent light output,
position the power supply near to the power feed end of the
LED Neon, and keep the line as short as possible
–
Ensure your maximum run per power feed adheres to the
guidelines; see specification sheet.
RGBW
–
Ensure to add 20% buffer when selecting a power supply
–
Before making any cuts, installation, maintenance, or connection, be
sure the mains power is disconnected.
–
If essential; cut and connect LED Neon correctly. Any incorrect
operation can cause damage (IP67 Snap connectors only).
–
All IP67 snap connector joints must be connected correctly to achieve
connector IP rating. See ‘Neon Y - IP67 Snap Installation.pdf’
RGB
green wire: green “G” terminal (-)
black wire: blue “B” terminal (-)
yellow wire: 24V+
red wire: red “R” terminal (-)
TUNEABLE WHITE
black wire: Cool White connection (-)
red wire: 24V+
yellow wire: Warm White connection (-)
SINGLE COLOUR
green wire: green “G” terminal (-)
black wire: blue “B” terminal (-)
white wire: White “W” terminal (-)
green wire: address
blue wire: DMX (-)
white wire: ground (-)
yellow wire: 24V+
red wire: red “R” terminal (-)
yellow wire: DMX (+)
red wire: 24V+
black wire: ground (-)
red wire: 24V+
DMX DYNAMIC RGB / RGBW ‘CHASING’
The product specification sheet will provide the specific product operating voltage and the wattage per metre. Care should be
taken to ensure the operating voltage is constant (constant voltage).
The below diagrams indicate the number of cable cores and the connections they relate to. Each manufactured length will have
a factory fitted label which indicates the correct cores to use, as well as the colour of each specific core and its associated
connection. Reference should always be made to the label on the product itself as sometimes, the cable colours may vary
pending manufacturing processes or for custom orders. If in doubt contact support for assistance before connecting to power.
NEON Y | CORES & WIRE CONNECTION REFERENCE
REFER TO INDIVIDUAL SPECIFICATION SHEETS CONNECTION DIAGRAMS
2/8