Contents
Lightcloud Controller
Instruction Manual
Wire Nuts
Lock Nut
O-ring
x 3
x 3
Controller requires constant, unswitched power. Any wires not in use
must be capped off or otherwise insulated. This product should
only be installed by a qualified electrician and in compliance
with local and national electrical codes.
!
Specifications
PART NUMBER
LCCONTROL/MINI
INPUT
120V-277VAC, 60Hz
<0.8W (Standby and Active)
MAXIMUM SWITCHED LOAD RATINGS
For Control of Electronic Ballast (LED)
and Magnetic Ballast
Electronic/Tungsten: 4.2A @120VAC
Inductive/Resistive: 4.2A @120VAC, 1.8A @277VAC
OPERATING TEMPERATURE
-35ºC to +60ºC
OVERALL DIMENSIONS
1.6" diameter, 3.8" length
1/2" NPT Mount, Male
22AWG pigtails
18AWG pigtails
WIRELESS RANGE
Class 2
IP66 Rated
Indoor and Outdoor Rated
Wet and Damp Location
Plenum Rated
Line-of-Sight: 1000 feet
Obstructions: 100 feet
Operating Modes
CONTROLLER:
Provides switching and dimming for a single zone.
REPEATER:
Extends the Lightcloud mesh network without controlling
a load.
SENSOR (REQUIRES OPTIONAL SENSOR MODULE):
Provides occupancy,
vacancy, and daylight harvesting.
POWER MEASUREMENT:
The Lightcloud Controller is capable of
measuring the power usage of the attached circuit.
POWER LOSS DETECTION:
If mains power to the Controller is lost, the
device will detect this and alert the Lightcloud application.
EMERGENCY DEFAULT:
If communication is lost, the Controller may
optionally fall back to a specific state, such as turning the attached
circuit on.
1 (844) LIGHTCLOUD
or 1 (844) 544-4825
WE’RE HERE TO HELP:
Functionality
Configuration
To configure Lightcloud products, use the Web Application
(control.lightcloud.com) or call 1(844)LIGHTCLOUD.
