Lightcloud LCBC6R189TWUNVWS-SS-NS, Manual, Page: 7 / 10

Without Existing Housing
2b
3. Install junction box cover plate.
1. Use template inside box to cut hole in ceiling.
(Fig.10)
(Fig.12)
4. Install the downlight by lifting both retention tabs upward. (Fig.13)
2. Fasten the downlight MC cable to a junction box with MC connector. Wire nut the ground (
green
)
wire in the junction box. Wire nut the black input wire with the black wire from the MC cable, and
wire nut the white input wire with the white wire from the MC cable. Wire nut the purple input
wire with the purple wire from the MC cable, and wire nut the pink input wire with the pink wire
from the MC cable. If the purple and pink wires are not in use, cap these with wire nuts.
(Fig.11)
Fig: 10
5. Push the downlight until it sits flush against the ceiling. (Fig.14)
Fig: 11 Fig: 12
Fig: 13 Fig: 14
MC
connector
Installing your Lightcloud Blue Device
(cont’d)