Lightair CellFlow Mini 100, Manual

Page: 12 / 40

12
CLEANING AND CARE
• You need to make sure the device is not electrified before cleaning it.
Power off the device and unplug the cord.
• For external cleaning, please use a damp cloth or sponge, gently dry off the device.
• Avoid getting the particle filter wet.
Step-by-step cleaning of the pre-filter
1. Remove the front grille
• Use your thumb and forefinger.
• Grab the plastic tab.
• The grille is attached using magnets.
Remove the grille by pulling outward.
• Take off the grille and set it to one side.
2. Remove the pre-filter
• Grab around the pre-filter, pulling straight
outward, be careful not to damage the
carbon brush which is at the centre of
the device.
• Wash the pre-filter in running water, or let it
soak. A gentle degreasing agent can be used.
3. Attach the pre-filter
Please note:
The pre-filter must be 100% dry before
being reattached.
• Remove the front grille.
• Centre the hole of the pre-filter on
the device hub in the middle.
• The pre-filter is fitted into its slot.
4. Reattach the front grille
• The bottom of the front grille has a guiding
element.
• Align the guide with the corresponding hole
in the device.
• Angle the front grille until the power from
the magnets takes over and the grille
automatically falls into place (with a click).
1.
2.
3.
4.
ENGLISH