4
3. SETUP
3.1 Neck and Action Adjustments
Your bass is equipped with a truss rod for neck adjustments.
Always perform this adjustment before proceeding to set up the
playing action and the LightWave Pickup System. If you are
unfamiliar with truss rods and instrument setup, please consult a
reputable guitar tech.
3.2 Saddle Adjustment
Each string has a saddle height adjustment screw, located in the
string saddle in the monolithic bridge assembly. Turning the screw
clockwise raises the saddle; turning counterclockwise lowers it.
Use a .050” hex driver for adjustment. The action can be adjusted
while the strings are under tension.
Adjusting the saddle height or changing string gauges typically
requires realigning the optics (see 3.4 Optics Alignment).
Exchanging a fresh set of identical strings (the same gauge and
brand) should not require realigning the optics.
Closeup Showing Monolith Detail
Hex Adjustment Screw
for Adjusting Optics
(5/64” hex)
String Saddle Height Adjustment Screw
(.050” hex)
Monolith Mounting Screw
for Adjusting Intonation
(one of two 3mm hex)
Monolith Mounting Screw
for Adjusting Intonation
(one of two 3mm hex)
