LIGHT PROGRESS
DIRECT-H-NX [Eng.]
Rev. 3 Eng. Oct 2020
Pag. 14/16
DECLARATION OF COMPLIANCE
We, LIGHT PROGRESS S.r.l., hereby declare under our own responsibility that the following units of own production:
UV-DIRECT…-H-NX series
are in accordance with EEC directive 2014/30/EU (Electromagnetic Compatibility)
are in accordance with EEC Machinery Directive dispositions 2006/42/EU
are in accordance with EEC Low Voltage Directive 2014/35/EU
are in accordance with EEC (RoHS) 2011/65/EU (D.Lgs 4 Marzo 2014, n.27)
TECHNICAL STANDARDS APPLIED
UNI EN ISO 12100:2010
Safety of Machinery - Basic Concepts, General Principles for Design - Risk
assessment and risk reduction
UNI EN ISO 13857:2008
Safety of Machinery - Safety Distances to prevent danger zones being reached
by the upper and lower limbs (2008)
ISO 14120:2015
Safety of Machinery - Guards - General Requirements for the Design and
construction of fixed and movable guards
UNI EN ISO 13849-1:2016
Safety of Machinery - Parts of the Control System related to the Safety – Part 1:
General Design Principles
UNI EN ISO 14119:2013
Safety of Machinery - Interlocking devices associated with guards - Principles for
design and selection
CEI EN 60204-1/2016
Safety of Machinery - Electrical Equipment of Machines. Part 1: General Rules
(2010)
EN 61439-1:2011
Low-voltage Switchgear and Control Gear Assemblies. Part 1: General rules
FURTHER TECHNICAL STANDARDS APPLIED:
IEC EN 60335-1 "Safety of household electrical appliances and similar”
Electronic Ballasts for the control of the lamps in accordance with the standard EN 60928.
Germicidal UV-C Lamps in accordance with EN 61199.
Electrical Protective Measures in accordance with IEC 70-1, EN 60229.
Anghiari, 4.22.2020
Responsible for Standards: Dr. Aldo Santi
LIGHT PROGRESS S.r.l. Loc. San Lorenzo, 40 - 52031 ANGHIARI (AR) - ITALY -
