DC-MP3
Page 25
These are the default scheduling parameters. Click
the boxes next to any days for which you wish to
change the start/end times. Use the
Start Hour/Min
and
End Hour/Min
sections to select the times you
want. Click the
Change Selected Days
button to
change the start/end times for the selected days.
To prevent the show from running on a particular
day set the
Start Hour/Min
and the
End Hour/Min
to
the same value.
To have shows run back to back, set the start time of
the second show to the end time of the first show.
Only one show can play at a time. If you schedule
two or more shows during the same time period,
precedence is given to the lowest numbered show.
When you are satisfied with your schedule, click the
OK
button,
Use the
Select How Show Plays
section to choose
how the show will play during the scheduled time
periods. If you select…
•
Loop though Showlist continuously
–
Sequences in the show play in order and
repeat continuously from the start time until
the end time.
•
Play through Showlist one time only
–
Sequences in the show play in order one time
unless the time period is less than the show’s
length.
•
Play show once per hour
or
½ hour
–
Sequences in the show play once per hour or
half-hour.
DC-MP3
Page 26
If you select either of
Play through Showlist one time
only
or
Play show once per hour
or
½ hour
, then
you must choose what to do while the Showlist is not
playing during the scheduled time period. Use the
Action to take between shows
section to select one
of:
•
Lights On
– all lights will be on between
shows
•
Lights Off
– all lights will be off between
shows
•
Filler Seq
– runs this sequence between
shows. This can only be an animation
sequence. Click the
Select Filler Sequence
button to pick an animation sequence to use
between playing the Showlist sequences.
Note that if you have more than one unscheduled,
untriggered show and you want them to play in order
when no scheduled or triggered show is playing,
don’t use “Play through Showlist one time only.” If
you use this option, you will have specified what to
do when the show ends (Lights on, Lights Off or
Filler Sequence.) These options will prevent the
next unscheduled, untriggered show from starting.
Skip down to
Adding Sequences to the Show.
Triggered Show
If you select “Plays when triggered,” you will see this
window:
