Pixie
31
Pixie8D (second generation)
POWER INPU
TS
FUSES
RESET/TEST
LOGIC POWER INPUT
STATUS LED
JP2 install jumper to connect accessory
power to RJ45 jacks.
JP3 is used to connect inputs (interactive
show triggers) to the controller.
JP4 install jumper to connect 120Ω
termination resistor.
JP5 is used to select some factory
configurations and must be empty to allow
proper operation of the Pixie4DMX and to
allow the Hardware Utility setting of
pixels/string and color order.
The fuses limit current for individual strings.
Power must be connected to the “Logic
Power Input” side of the controller for
operation.
Pixie
32
Pixie16D (first generation)
JP3 is used to connect inputs (interactive
show triggers) to the controller.
JP5 is used to select some factory the
Hardware Utility setting of RGB IC,
pixels/string and color order.
The fuses limit current for individual strings.
Power must be connected to the “Logic
Power Input” side of the controller for
operation.
