Pixie
29
Pixie4DMX Isolated with XLR3 Jacks
STATUS LED
RESET/TEST
DMX ACTIVE
USB
JP3 is used to connect inputs (interactive
show triggers) to the controller.
JP4 jumper in place inserts a 120Ω
termination resistor.
JP5 is used to select some factory
configurations and must be empty to allow
proper operation of the Pixie4DMX and to
allow the Hardware Utility setting of
pixels/string and color order.
The DMX universes on the XLR3 jacks are
electrically isolated from the LOR network and
from each other.
Pixie
30
Pixie8D (first generation)
POWER
INPU
TS
JP3 is used to connect inputs (interactive
show triggers) to the controller.
JP5 is used to select some factory
configurations and must be empty to allow the
Hardware Utility setting of pixels/string and
color order.
The fuses limit current for individual strings.
Power must be connected to the “Logic
Power Input” side of the controller for
operation.
