background image

LEGO STAR WARS HOTH AT-ST WALKER 75322 LIGHT KIT INSTALL GUIDE

TROUBLESHOOTING 25

Troubleshooting

Check Your Expansion Board 
Ports/ Strip Light Ports / 
Effects Board Ports

It is important to note that connectors can 
only be inserted to the expansion board, strip 
light, or effects board ports in one direction.

Forcibly inserting connectors in the incorrect 
direction will result in damaging the pins 
inside each of the ports on your component 
board.

Not only will a light connected to the 
damaged port not work, but if the pins inside 
the port are bent to a point they are touching 
each other, this can result in all other lights 
in the system to stop working. This is a short 
circuit. 

A short circuit can also result in 
overheating of the board, cable or 
batteries. If you suspect a short circuit, 
DISCONNECT POWER IMMEDIATELY 
Batteries can fail, catch fire, or even 
explode if left connected to a short circuit 
for too long.

If you suspect you have a faulty 
component due to a bent pin, try the 
following steps:

If you look carefully inside each of the 
ports, each port contains 2 small pins that 
should be straight. You will be able to 
identify a faulty port if it has any bent pins.

Summary of Contents for 75322




























Reviews: