Routine Maintenance and common faults
………………………■
Periodically clean your machine to reduce replacement or repair costs.
The machine can be blocked due to high concentration fluid, bad quality fluid
or overheat, so regular care and maintenance can ensure long lifetime. After
about 20 hours use, please use 80% distilled water and 20% white vinegar to
remove the accumulated impurities inside the heat pipe, as following:
1
)
Clean the pipe in the tank and the filter head.
2
)
Take out the fog liquid and use the cleaning liquid (80% distilled water
and 20% white vinegar) to clean the machine. Keep it operating till the
cleaning liquid runs out.
If the fog turns less, the pump starts making noise, or the fog completely
stops, you should turn off the power immediately and check the fluid tank,
fuse, controller interface and power. If all of these are normal and the
problems still occurs, please contact your supplier.
UPFOGGER 1500 RGB
MANUAL