DMX-512 Connection with DMX Terminator
For installations where the DMX cable has to run a long distance or is in an
electrically noisy environment, it is recommended to use a DMX terminator. This
helps in preventing corruption of the digital signal by electrical noise. The DMX
terminator is simply an XLR plug with a 120 resistor connected between pins 2 and 3,
which is then plugged into the output XLR socket of the last fixture in the chain.
Please see illustrations below.
Technical Specifications
Input power: AC100-240V 50/60 Hz
Power consumption: 240W
LED: 200W high power LED
DMX channel: 6/18 channels
Pan scan
：
540° (16 bit)
Tilt scan
：
270° (16 bit)
Color wheel: one color wheel, 7 kinds of color chips in one color wheel
Static Gobo wheel: 8 gobo + open
Rotating Gobo Wheel: 6 gobo + open
Effect Wheel: Rotating 3 facet prism
Motorized focus
Beam angle: 5°/13° degrees
Control mode: DMX512/Master-Slave/Auto run
Display: LCD display
WEIGHT&SIZE
Net weight: 11.25 KG
Gross weight: 13.25 KG
Packing size: 47.5*35.5*38cm
Summary of Contents for MH-200 LED HYBRID
Page 1: ...MH 200 LED HYBRID USER MANUAL ...
Page 6: ...Dimensions Lumen Chart ...
