8
5.
Operation by IR remote
:
You can also operate this product by IR remote,
the distance available is at most 10m.
Notice:IR remote can also be used when the unit is in the DMX mode.
The picture of the IR remote:
AUTO RUN mode
Press AUTO RUN button to choose Auto run mode. Press FLASH to turn on the flash of the Auto
Run and then press “+” and “-“ buttons to adjust flash speed. You can also put in two numbers
00-99 to adjust flash speed, 00 is to turn off flash, 01 is the slowest speed, 99 is the fastest speed.
Select program Mode
Press PROG to cycle among the built-in programs, it contains static colour select mode, colour
jumping mode and color dreaming mode. Each press of this button will change to the next mode.
1. When the flat par goes into the static color mode, press “+” and “-” or put in two numbers 00-15
to select the 15 static colours. You can press FLASH to turn on flash and press “+” and “-” or put in
two numbers 00-99 to adjust the flash speed, 00 is to turn off flash, 01 is the slowest speed, 99 is
the fastest speed.
2. When the flat par goes into color jumping mode or color dreaming mode, press “+”and “-” or put
in two numbers 01-99 to adjust the program speed, 01 is slowest, 99 is the fastest. You can press
FLASH to turn on flash and press “+” and “-” or put in two numbers 00-99 to adjust the flash speed,
00 is to turn off flash, 01 is the slowest speed, 99 is the fastest speed.
Sound Active Mode
Press SA to display sound active mode, press “+” and “-” or put in two numbers 00-31 to adjust the
sound active sensitivity level. 00 is sound active off, 01 is the lowest level, 31 is the highest level.
M/S mode
Press SL to display slave mode.
