INSTALLATION AND USERS GUIDE
Operation
•
Switch on the device, the green power indicator light turns on.
•
On either the fixture control panel or supplied remote control
：
1> Press the <30 mins>, <60 mins> or < 120 mins> touch key/button to select your
desired disinfection time, the touch key indicator light turns on.
2> Press the start touch key/ button, audible alarm starts beeping and red power indicator
will flash regularly for 3 minutes. You must exit within this 3 minutes.
•
The UV tubes will light up once the beeping countdown ends, the power indicator turns
red and stays on during the entire disinfection process.
•
Once the disinfection process ends, the touch indicator turns off and the power indicator
switches to green. Also an audible alarm sounds.
•
Open the doors and windows to ventilate the disinfected area.
Control Panel
Remote control
*** If the remote control loses pairing with the device, re-do the pairing by pressing the Start
button on the remote control and switch on the device for 5 seconds. One remote control can
be matched with multiple units of the same model. ***
