USER MANUAL
–
HDN
–
EN VERSION 02.01
Liftup A/S
| Hagensvej 21 | DK-9530 Støvring | Denmark |
T:
+45 96 86 30 20 |
M:
[email protected] | www.liftup.dk | CVR DK-1015 3964
12
7.
Functioning
The HDN lift is a so-
called “dead man operated” lifting platform,
i.e. the buttons must be
depressed during the entire motion.
The platform works simply by the user calling it by pressing one of the buttons on the wall, or
by using the supplied remote control (optional equipment). When the user is on the lifting
platform this is operated from the panel by the platform, where one can choose to be conveyed
to the upper or lower level.
8.
Assembly
The lifting platform must be installed by an authorised* service technician. Do not attempt to
transport or uninstall your HDN lift, or to repair it. This MUST be undertaken by an authorised*
service technician.
Improper assembly can pose risks for user personal safety. Liftup disclaims any liability if assembly
and installation are not performed by an authorised* service technician.
For more information or materials on assembly, contact your dealer:
(
https://www.liftup.dk/en/distributors/#
*Has completed a Liftup product and service course
(Denmark
only)
In
Denmark
, effective as of 30 June 2016 the Danish Working Environment
Authority has introduced new regulations for owners/users of elevators, lift products
etc. (Danish Working Environment Authority Executive Order 461 of 23 May 2016).
This is relevant for the number of preventative maintenance inspections and for the
statutory control of the erection of the product. In order to quality assure these
inspections, Liftup has developed and implemented an online service log which is
accessible for all our lift products. All inspections and controls in future must be
registered in this log (see section 17 for more details on the online service log).
9.
Start-up
The HDN lift
’s
control unit should always be connected to a 230V socket and be switched on.
Normally the lift is in constant stand-by mode, i.e. it is ready for use as soon as one of the
operating buttons is pressed.
